Garage Door Repair Santa Clarita Maintenance

garage door maintenance should be as part of your weekend to-do list at least a few times a yr. Your garage doors get much more useful than you may realize. In an average household, a carport door typically is sealed and opened 10-20 times per day. On the 12 months, that’s a lot of opening and closings. Remaining un-maintained garage doors will eventually fail to lead to not only the inconvenience but by using damage or harm to your vehicles, your home and even to yourself. Consequently, it is important to perform garage door maintenance at least 2 times 12 months.

Torsion Suspension systems and Rollers

There are a number of physical areas of a garage door that should be checked out. Examine the garage door rollers, torsion springs and metal brackets that affix the garage door to the house. Cause them to become all securely fastened and the rollers turn smoothly in the garage door spring.

In the event, the rollers are not turning smoothly examine them to determine if they may be broken or maybe simply require a lubricant. If they look damaged replace them. They will are typically easy to remove. If they are just sticking a little, apply some silicon structured lubricant to them.


As part of the garage door maintenance process, it is also important to examine the tracks and ensure the sections that are attached together are flush with each other. Frequently a bolt will loosen up that holds the monitors together. If this happens, the tracks may become slightly skewed from each other, or the loose bolt may protrude in the track area, creating the doorway rollers to sometimes catch on them. This can cause the added torque on the garage door opener which may trigger it to reverse direction. Simply fasten up any loose monitor bolts and make sure the track sections are flush.

Additionally, it is a good idea to oil the garage door paths with motor oil, electronic. g. 10W40. Use a rag and simply clean them down.

Also, while examining the garage door tracks use a good to ensure they are level. That they must be fastened to the garage door opening such that they are parallel with it. If they are not, adapt them appropriately so they are.


As part of the garage door maintenance process, you should also examine the suspension systems and make sure they can be fastened solidly to the garage door and garage area door frame. Manually available and close the garage door and see if the door seems extremely heavy while training or requires extra work to shut. If it does, then the suspension springs need adjusting. The suspension springs should be adjusted in a way that when the garage door is lifted halfway available, it stays halfway wide open. It may not move on its own either up or down, without additional pressure being used on it. Note: Garage door suspension springs under tension can be quite dangerous and therefore changing garage door springs should be left to garage door repair Santa Clarita professional.

It is also a good idea to wipe the springs with little automotive products to make certain they do not catch when opening or closing the garage door.

Check the base of the garage door to be sure you cannot find any rust or corrosion, pending if it is a metal or solid wood garage door. Also look into the weather-stripping to see if it is damaged. If perhaps it does not need replacing, at least wash it down with a vinyl cleaner to protect it from UV harm also to preserve it flexible and pliable.

With these few garage door maintenance tipsFree Articles, your garage entry doors should continue to work efficiently for months to come.